150 Height SS304 Corrugated Plate Vane Pack Mist Eliminator

• Customization: Available
• Manufacturing Process: Stamping
• Surface Treatment: Galvanized
• Model NO.: 304/316L
• Material: Stainless Steel
• Type: Mist Eliminator
• Property: Long Service Life
• Raw Material: Stainless
• Transport Package: Wooden Box, Ton Bag
• Specification: SS 304/ 316L
• Trademark: Suzhou Wojun
• Origin: Suzhou Jiangsu
• HS Code: 84199090
• Production Capacity: 5000 Tons/Year
• Package Size: 100.00cm * 100.00cm * 100.00cm
• Package Gross Weight: 175.000kg

Product Description

Product Description

The mist eliminator is mainly composed of corrugated blades, plates, card strips and other fixing devices. In the wet desulfurization process, the absorption tower is prone to produce "fog" with a particle size of 10-60 microns during the operation, and the "fog" is not only Containing moisture, it also dissolves sulfuric acid, sulfate, sulfur dioxide, etc., and also causes fouling and severe corrosion of fans, heat exchangers and flue. Therefore, the wet desulfurization process requires defogging on the absorption equipment and is purified. The gas is demisted before leaving the absorption tower. The mist eliminator nozzle is one of the main components of the defogging system.

Vane mist eliminators are physical separating devices that work on the principle of inertial impaction.  Vanes, sometimes called chevrons, are parallel corrugated sheets held at a fixed distance apart to create a sinuous flow path for mist laden gas.  As the mist laden gas flows through the vane, at every change in the direction the droplet tends to move in a straighter line than the bulk of gas.  The captured droplets coalesce on the vane, forming larger drops which subsequently trickles down.  Depending upon the operating conditions and physical properties of gas & liquid, typical droplet separation ranges from 10 µm to 40 µm.

Advantages of vane mist eliminator:

• High gas & liquid handling capacity
• Low pressure drop
• Rugged construction
• Wide variety of materials
• Resistant to fouling
• Easy to clean
• Pocketed and non-pocket design

Detailed Photos

Advantages of vane pack demister / mist eliminator

1. Lower pressure drop.

2. Resistance to fouling.

3. High tensile strength.

4. Durable and long service life.

5. Custom-made design available.

6. High filtering and separating efficiency.

7. High capacity. It has 30% to 100% more capacity than the wire mesh mist eliminator.

Support Customization

Product Parameters

 

Table 3 data sheet of demister
1.	Project No.:
2.	Equipment name				Vane demister
3.	Quantity	In use		quantity	1
		Spare parts		quantity	0
		Total		quantity	1
4.	Purpose				Removal of slurry droplets in FGD emission And control the dust emission concentration at the outlet of absorption tower
5.	Basic design conditions
	1) Characteristics of flue gas
	(1) Name of flue gas				Flue gas after dust removal and desulfurization
	(2) Flue gas flow at absorber inlet			m^3/h	31000
	(3) Dust concentration at absorber inlet			mg/Nm^3	≤20(Standard state dry basis,3%O2)
	Flue gas flow at absorber outlet			m^3/h	32500
	Flue gas velocity			m/s	≤2.0
	(4) Outlet temperature of absorption tower			ºC	45
	(5) pressure			kPaG	1.0
	(6) Expected flue gas composition				See Table 1
	(7) Expected droplet composition
	H2O		(liquid)	wt%	~95
	Na2S		(solid)	wt%	4
	Na2HS		(solid)	wt%	1
	Droplet characteristics
	Density			kg/m^3	~1020
	PH			-	7~10
	Viscosity			cPa	<3
	2) Type of demister				As per order
	3) Installation position				Upper part of absorber
6.	Structural design conditions
	1) Standards, specifications				As per order
	2) Design pressure of absorber			kPa·G	-1.0~+5.0
	9) Design temperature(maximum temperature and time of mist eliminator)				Depends on material
	Shell			ºC/min
	demister			ºC/min
	3) Corrosion allowance
	4) Shell size of demister				Inner diameter of absorption section of absorption tower Φ 2.6m
	5) texture of material
	Absorber shell
	Demister body				304, 316L, 2205, 2507, TA2, etc.
	Flushing nozzle
	Internal flushing pipe fittings
	Internal support

 

 

Company Profile

 

 

Suzhou Wojun - one of the renowned manufacturers, suppliers and exporters of tower packing, tower internals for 16 years.

 

Our Advantages

 

Partnering with Suzhou Wojun means you get to work with industry experts with decades of experience in the mass transfer and metal fabrication industries. Some of the benefits of choosing us include:

Competitive pricing: We possess unwavering confidence in the caliber of our products and services, and we are eager for our customers to partake in and sense that same level of assurance. We strive to maintain our prices at a highly competitive level, thereby ensuring the accessibility of our offerings to a broader spectrum of individuals.

Quick turnaround: We maintain an inventory of tower packing and tower internals in an array of materials and sizes. Our engineers can assist your team in finding the right product to help streamline your processes. We carefully select and inspect every unit to ensure optimal performance.

Custom solutions: Different industries have varying demands, so we offer customers solutions tailored to their specific industry needs. Our engineering services and fabrication expertise ensure you get exactly what you need for your business's specialty.

If your organization is looking for a reliable manufacturer of tower packings and tower internals that serves the world, Suzhou Wojun is here to serve you.

Contact our team to discuss your operational needs.