SS304 Round Chevron Plate 30mm Vane Pack Mist Eliminator

• Customization: Available
• Manufacturing Process: Lascer Cutting and Plate Bending
• Surface Treatment: Without Processing
• Model NO.: ID2600
• Material: Stainless Steel
• Plate Thickness: 0.5mm, 0.8mm, 1mm, 1.2mm, 1.5mm, 2mm, etc.
• Vane Spitch: 10mm, 20mm, 25mm, 30mm, etc.
• Vane Type: as Per Order
• Construction Method: Steel Rod, Welded Bar, etc.
• Pressure Drop: Very Low
• Service Period: Over 10 Years
• Transport Package: Pallet
• Specification: ID600-ID16000
• Trademark: Wojun
• Origin: China
• HS Code: 842139
• Production Capacity: 5000 PCS / Year
• Package Size: 70.00cm * 70.00cm * 30.00cm
• Package Gross Weight: 60.000kg

Product Description

 

Large size round shape corrosion resistance chevron plate demister

 

 

1. Corrosion resistance chevron plate demister application

 

The corrosion resistance chevron plate demister is widely used in gas-liquid separation devices
chemical	petroleum
sulfuric acid	medicine
light industry	metallurgy
machinery	environmental protection
tower manufacturing	pressure vessel
many other industries.

 

2. Factors affecting the performance of corrosion resistance chevron plate demister:

• flue gas flow rate:
  • the flue gas flow rate is expressed in terms of the air bed gas velocity u, and sometimes by the kinetic energy factor F of the air bed gas, which is an important technical parameter. Its value will directly affect the demisting efficiency and pressure drop of the equipment, and it is also an important basis for equipment design or production capacity accounting.
• demisting efficiency:
  • demisting efficiency refers to the ratio of the mass of droplets captured by the mist eliminator in unit time to the mass of droplets entering the demister.
• system pressure drop:
  • system pressure drop refers to the pressure loss caused by flue gas passing through the vane pack mist eliminator. The larger the system pressure drop is, the higher the energy consumption will be.
• pitch of vane plates:
  • the selection of the distance between vane plates is very important to ensure the efficiency of de-misting and maintain the stable operation of the mist eliminating system.
• mist eliminator stages:
  • in the process of mist eliminating, in order to increase the efficiency of mist eliminator, folding plates are usually connected to form a multi-stage mist eliminator. Generally, the more the stages are, the higher the efficiency of mist eliminator is. However, the resistance of the system will be greatly increased while the efficiency is improved, which not only increases the energy consumption of the system, but also threatens the normal operation of the system. Therefore, the number of vane plates should not be too many, generally two to three levels are appropriate.
• flushing interval of vane pack mist eliminator.

3. Advantages of corrosion resistance chevron plate demister

1. Lower pressure drop.
2. Resistance to fouling.
3. High tensile strength.
4. Durable and long service life.
5. Custom-made design available.
6. High filtering and separating efficiency.
7. High capacity. It has 30% to 100% more capacity than the wire mesh mist eliminator.

4. A method to estimate weight of corrosion resistance chevron plate demister

 

Type	corrugated plate height /mm	total demister height /mm	orignal plate width /mm	frame size /mm	Pitch of vane
2 pass	170	200	200	H:40*W:20	20mm, 25mm, 30mm or as per order
3 pass	230	250	280	H:40*W:20

 

For example, if the required plate distance is 25mm, it takes about 37 pcs of 1m length corrugated plates and necessary frames to build a 1m*1m chevron mist eliminator. Then the mist eliminator unit weight =37*single plate weight+frame weight (properly estimated).

 

5. Wojun factory capacity in corrosion resistance chevron plate demister                      

 

We have machines and experienced workers to handle the stainless steel corrugated plates. The finished products are shinning and accurate with the design drawing. Ah, we can provide installation guideline drawing, too.