SS316 Donut Mesh Pad Mist Eliminator Stainless Steel

• Customization: Available
• Material: Metal
• Layers: Bunk
• Model NO.: Donut demister pad
• Usage: Liquid Filter, Air Filter
• Type: Perforated Metal Mesh
• Hole Shape: Round
• Structure: Multilayered
• Type 1: Sp
• Type 2: Dp
• Type 3: HP
• Advantage 1: Low Pressure Drop
• Advantage 2: High Fog Removal Efficiency
• Advantage 3: High Fog Removal Efficiency
• Mesh Density: 144
• Application: Refinery Distillation Column
• Transport Package: Carton Box, Wooden Case
• Specification: Diameter 500mm
• Trademark: WOJUN
• Origin: China
• Production Capacity: 50000pieces/Year
• Package Size: 61.00cm * 61.00cm * 16.50cm
• Package Gross Weight: 50.000kg

Product Description

Ss316 Donut Mesh Pad Mist Eliminator Stainless Steel

Description

Material:	As Per Order	Application:	Refinery Distillation Column
Wire Size:	Customer Order	Mesh Thickness:	As Per Customer Design
Mesh Density:	144, Or As Per Requirement	Shape:	Any Shape Needed
Packing:	Carton Or Wooden Case	Service:	Online Service
High Light:	donut mesh pad mist eliminator ,  ss 316 mesh pad mist eliminator ,  316 stainless steel wire mesh demister

 

 

Refining distillation column removal parts wire mesh demister

 

Wire Mesh Demister Mist Eliminators Standard Specification

 

1. General introduction of wire mesh demister specification

1.1 Scope

A.This Standard Specification covers the general requirements for design, construction, fabrication, and material of Mist Eliminators specified in XXX Project Specifications.

B.Exceptions or variations shown in the Project Specifications take precedence over requirements shown herein.

1. 2References

Unless noted below, use the edition and addenda of each referenced document current on the date of this Standard Specification. When a referenced document incorporates another document, use the edition of that document required by the referenced document.

A.American Society for Testing and Materials (ASTM) A-478, Specification for Chromium-Nickel Stainless and Heat-Resisting Steel Weaving and Knitting Wire.

B.ASTM B-164, Specification for Nickel-Copper Alloy Rod, Bar, and Wire.

2. Design of wire mesh demister

A.Size, style, thickness, configuration, and materials are specified in XXX Project Specification - Vessels.

B.Mist Eliminator styles are defined as follows:

Style	Material	Density lb/ft^3 (kg/m^3)	Wire Diameter Inches (mm)
A	Metallic	9 (144.2)	0.011 (0.28)
B	Metallic	5 (80.1)	0.011 (0.28)
C	Metallic	12 (192.2)	0.011 (0.28)
D	Polytetrafluroethylene (PTFE)	normal	0.012 (0.30)
F	Polypropylene	normal	0.012 (0.30)
G	Metallic	Variable 5 (80.1) - 9 (144.2)	0.011 (0.28)
V	Metallic	Other	normal

C.Style G is a mesh blanket having a variable knitted density. The vapor inlet section is the least dense and the outlet section the densest. Typical inlet/outlet knitted mesh densities are 5 lb/ft3 (80.1) and 9 lb/ft3 (144.2). The customer can require variable density blankets having slightly different knitted densities and wire diameters.

Style V is to be determined by the vendor, based on the process conditions provided by customer. Vendor may determine the mist eliminator type best suited to meet the mist elimination requirement. The selected style may include a mesh pad, vane or a combination of mesh & vanes. The mist eliminator may be oriented vertically, horizontally or at an angle determined by the vendor. A single pad of variable knitted density may also be applied.

3. Materials of wire mesh demister

3.1 Metallic Mesh Pads

Materials for metallic Mist Eliminators are as per customer need. Type 304 or Type 316 mesh pads can be in accordance with ASTM A-478. Monel mesh pads can be in accordance with ASTM B-164.

3.2 Non-metallic Mist Eliminators

Non-metallic Mist Eliminators shall be PTFE or polypropylene as specified in by customer.

3.3 Supports

A.Supports welded to the vessel shall be the same material as the shell. Where the shell is lined, supports welded to the lining shall be the same material as the lining.

B.Supports not welded to the shell (e.g. beams) shall be the same material as the Mist Eliminator.

3.4 Grids

A.Metallic grids can be the same material as the mesh pad

B.For non-metallic mesh pads, the grids shall be carbon steel, coated with the same material as the mesh pad.

3.5 Fastening Devices

A.For metallic mesh pads the wire ties or other fastening devices shall be of the same material as the Mist Eliminator.For non-metallic mesh pads, the grids shall be carbon steel, coated with the same material as the mesh pad.

B.For non-metallic mesh pads the wire ties can be the same material as the mesh pad.

4. Applications of some main type of demister pad:

Mesh Density	Eq to: YORK	Description
80	931	For a given load of mist, the highest flow velocity is achieved of all styles. Ideal where it is required to minimize the pressure loss, possible clogging is concerned, the size of particle to be collected is relatively large, and/or a very high efficiency is not required.
144	431	Used for general purposes. An efficiency of 98 to 99% is achieved at a velocity of 1 to 5 m/sec.
192	421	Used where an especially high efficiency is required. While a pressure loss is slightly higher, it achieves an efficiency of 99 to 100% with particle sizes 3μ or more at a velocity of 1 to 6 m/sec., and is ideal where an efficiency of 90% or more is required at a velocity of 1 m/sec. or less.
216		Used for collecting fine particles of 1 to 3μ in size. Especially for a low-density mist of 1.0 g or less, it is used in a thickness of 200 to 300 mm.
432	333	Used for collecting fine particles. An efficiency higher than that of 216 can be achieved. The most remarkable characteristic is that it provides a high efficiency with a reduced thickness.

5. Demister Advangages:

Prevention of air pollution

Reduce of costly liquid lose

Reduce of product contamination

Improvement in process efficiency

Minimizing product losses in re-boilers & evaporators

Preventing carbon & metal entrainment in down stream catalyst cracker.

 

 

Free design and drawing service welcome to contact us.