| Customization: | Available |
|---|---|
| Manufacturing Process: | Lascer Cutting and Plate Bending |
| Surface Treatment: | Without Processing |
|
Still deciding? Get samples of US$ 199/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Custom made S type 3 pass 316L vane plate demister
1. Wojun vane plate demister structure,
The vane types are the Chevron type of mist eliminators which consist of a set of specially designed vanes with a well defined geometry, with closely spaced corrugated plates. They are very usual and useful internals for liquid separation from gas. These types according to design and shape can remove the droplets more than 8 microns.
Wojun has produced a range of mist eliminators for critical applications in the oil and gas sector, Standard Material of vane type mist eliminator is polypropylene & stainless steel.
2. Wojun vane plate demister datasheet,
| Table 3 data sheet of demister | |||||
| 1. | Project No.: | ||||
| 2. | Equipment name | Vane demister | |||
| 3. | Quantity | In use | quantity | 1 | |
| Spare parts | quantity | 0 | |||
| Total | quantity | 1 | |||
| 4. | Purpose |
Removal of slurry droplets in FGD emission And control the dust emission concentration at the outlet of absorption tower |
|||
| 5. | Basic design conditions | ||||
| 1) Characteristics of flue gas | |||||
| (1) Name of flue gas | Flue gas after dust removal and desulfurization | ||||
| (2) Flue gas flow at absorber inlet | m3/h | 31000 | |||
| (3) Dust concentration at absorber inlet | mg/Nm3 | ≤20(Standard state dry basis,3%O2) | |||
| Flue gas flow at absorber outlet | m3/h | 32500 | |||
| Flue gas velocity | m/s | ≤2.0 | |||
| (4) Outlet temperature of absorption tower | ºC | 45 | |||
| (5) pressure | kPaG | 1.0 | |||
| (6) Expected flue gas composition | See Table 1 | ||||
| (7) | |||||
| H2O | (liquid) | wt% | ~95 | ||
| Na2S | (solid) | wt% | 4 | ||
| Na2HS | (solid) | wt% | 1 | ||
| Droplet characteristics | |||||
| Density | kg/m3 | ~1020 | |||
| PH | - | 7~10 | |||
| Viscosity | cPa | <3 | |||
| 2) Type of demister | As per order | ||||
| 3) Installation position | Upper part of absorber | ||||
| 6. | Structural design conditions | ||||
| 1) Standards, specifications | As per order | ||||
| 2) Design pressure of absorber | kPa·G | -1.0~+5.0 | |||
| 9) Design temperature(maximum temperature and time of mist eliminator) | Depends on material | ||||
| Shell | ºC/min | ||||
| demister | ºC/min | ||||
| 3) Corrosion allowance | |||||
| 4) Shell size of demister | Inner diameter of absorption section of absorption tower Φ 2.6m | ||||
| 5) texture of material | |||||
|
|||||
|
304, 316L, 2205, 2507, TA2, etc. | ||||
|
|||||
|
|||||
|
|||||
3. When to use vane plate demister instead of mesh pad?
Larger droplets; High Gas Velocity; Low Pressure Drop; High Liquid Load; Extremely Viscous Liquid; Accumulated Residues; Clogging Particulates; Severe Corrosion; Surge Buffeting; Foam Problems.
4. Wojun vane plate demister stories,
I have a customer from South East Asia, who is in the vessel repair and service business. Early this year Mr. K enquired to us for a kind of vane plate mist eliminator to be used in ventilation system of vessels. It had limited space for the vessel and nominated gas flow direction, which was different from our normal intallation way. I listened to Mr. K carefully and made the draft drawing below for his checking. I took both the gas flow direction and space into consideration. Meanwhile I checked with our workers beforehand to see if they could realize my design with our raw material. After friendly communication, everything was settled and the order went into production soon.
Wojun vane plate mist eliminator allows inlet air to turn and pass between the profiles with minimum restriction. Drops impact the profile surface where they are collected and drained.
5. Wojun cases of custom made vane plate demister,
){kind=link}