| Customization: | Available |
|---|---|
| Manufacturing Process: | Lascer Cutting and Plate Bending |
| Surface Treatment: | Without Processing |
|
Still deciding? Get samples of US$ 199/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
SS304 vane pack mist eliminator diameter 4200mm chevron plate demister
The vane pack mist eliminator consists of a set of chevron corrugated plates with well defined geometry. It is very popular and useful internals for gas liquid separation applications. These plates according to design and shape can remove the droplets more than 8 microns.
Hualai factory has been producing a range of vane pack mist eliminators for critical applications in industrial use. Standard Material of vane type mist eliminator is polypropylene & stainless steel.
Vane Pack demister in this case:
| Item | Value | Unit |
| Material | SS304 | / |
| Shape & Size | Φ4200 | mm |
| Thickness | 250 | mm |
| Vane plate type | S type | / |
| Vane plate height | 230 | mm |
| Pitch of vane | 30 | mm |
| Frame | slotted grids | / |
Advantages of vane pack demister / mist eliminator
1.Lower pressure drop.
2.Resistance to fouling.
3.High tensile strength.
4.Durable and long service life.
5.Custom-made design available.
6.High filtering and separating efficiency.
7.High capacity. It has 30% to 100% more capacity than the wire mesh mist eliminator.
Applications of vane pack demister
Vane pack demister is widely used to separate entrained liquid droplets from gas stream, in which the liquid droplets are 8 μm or larger. When the gas stream passes through the vane pack demister and change direction, the liquid droplets are unable to change direction as quick as the gas due to their momentum. So the liquid droplets impact on the chevron blade and then coalesce and form large droplets until drain away.
In the special environment, where there is some small solid particles, vane pack mist eliminator is the better choice for liquid and gas separator than the wire mesh demister.
When to use vane type mist eliminator instead of mesh pad?
Larger droplets;
Surge Buffeting;
Foam Problems
Severe Corrosion;
High Liquid Load;
High Gas Velocity;
Low Pressure Drop;
Clogging Particulates;
Accumulated Residues;
Extremely Viscous Liquid.
when the gas containing mist flows through the demister at a certain speed, because of the inertial impact of the gas, the mist and wave plate collide and are attached to the wave plate surface. The multi fold structure of the wave plate of the mist eliminator increases the chance of catching and gathering the mist, and the undeleted mist will catch and gather at the next turn through the same function, so it will work repeatedly, thus greatly improving the efficiency of mist eliminator. After the gas passes through the chevron mist eliminator, there is basically no mist.
){kind=link}