9700 Teu Vessel Scrubbing System SS316L Vane Plate Demister

• Customization: Available
• Manufacturing Process: Lascer Cutting and Plate Bending
• Surface Treatment: Without Processing
• Model NO.: 600-800
• Material: Stainless Steel
• Plate Thickness: 0.5mm, 0.8mm, 1mm, 1.2mm, 1.5mm, 2mm, etc.
• Vane Spitch: 10mm, 20mm, 25mm, 30mm, etc.
• Vane Type: as Per Order
• Construction Method: Steel Rod, Welded Bar, etc.
• Pressure Drop: Very Low
• Service Period: Over 10 Years
• Transport Package: Pallet
• Specification: ID600-ID16000
• Trademark: Wojun
• Origin: China
• HS Code: 842139
• Production Capacity: 5000 PCS / Year
• Package Size: 70.00cm * 70.00cm * 30.00cm
• Package Gross Weight: 60.000kg

Product Description

9700 TEU Vessel Scrubbing System SS316L Vane Plate Demister

Vane Plate Demister Work Idea

When the gas containing mist flows through the demister at a certain speed, because of the inertial impact of the gas, the mist and wave plate collide and are attached to the wave plate surface. The diffusion of the mist on the surface of the corrugated plate and the gravity settlement of the mist cause the mist to form large droplets and move forward with the air flow to the turning of the corrugated plate. Because of the centrifugal force of the steering and its friction with the corrugated plate, the adsorption and the surface tension of the liquid, the droplets become larger and larger until the concentrated droplets are larger than the gravity generated by themselves, which exceeds the lifting force of the gas and the surface tension of the liquid. When the force is applied, the droplets are separated from the surface of the wave plate. The multi fold structure of the wave plate of the mist eliminator increases the chance of catching and gathering the mist, and the undeleted mist will catch and gather at the next turn through the same function, so it will work repeatedly, thus greatly improving the efficiency of mist eliminator. After the gas passes through the chevron mist eliminator, there is basically no mist.

Vane Plate Demister Datasheet

Table 3 data sheet of demister
1.	Project No.:
2.	Equipment name				Vane demister
3.	Quantity	In use		quantity	1
		Spare parts		quantity	0
		Total		quantity	1
4.	Purpose				Removal of slurry droplets in FGD emission And control the dust emission concentration at the outlet of absorption tower
5.	Basic design conditions
	1) Characteristics of flue gas
	(1) Name of flue gas				Flue gas after dust removal and desulfurization
	(2) Flue gas flow at absorber inlet			m^3/h	31000
	(3) Dust concentration at absorber inlet			mg/Nm^3	≤20(Standard state dry basis,3%O2)
	Flue gas flow at absorber outlet			m^3/h	32500
	Flue gas velocity			m/s	≤2.0
	(4) Outlet temperature of absorption tower			ºC	45
	(5) pressure			kPaG	1.0
	(6) Expected flue gas composition				See Table 1
	(7) Expected droplet composition
	H2O		(liquid)	wt%	~95
	Na2S		(solid)	wt%	4
	Na2HS		(solid)	wt%	1
	Droplet characteristics
	Density			kg/m^3	~1020
	PH			-	7~10
	Viscosity			cPa	<3
	2) Type of demister				As per order
	3) Installation position				Upper part of absorber
6.	Structural design conditions
	1) Standards, specifications				As per order
	2) Design pressure of absorber			kPa·G	-1.0~+5.0
	9) Design temperature(maximum temperature and time of mist eliminator)				Depends on material
	Shell			ºC/min
	demister			ºC/min
	3) Corrosion allowance
	4) Shell size of demister				Inner diameter of absorption section of absorption tower Φ 2.6m
	5) texture of material
	Absorber shell
	Demister body				304, 316L, 2205, 2507, TA2, etc.
	Flushing nozzle
	Internal flushing pipe fittings
	Internal support

 

Vane Plate Demister Advantage

1.Lower pressure drop.
2.Resistance to fouling.
3.High tensile strength.
4.Durable and long service life.
5.Custom-made design available.
6.High filtering and separating efficiency.
7.High capacity. It has 30% to 100% more capacity than the wire mesh mist eliminator.
 

Vane Plate Demister Types

Vane Plate Demister Photos