Basic Info.
Active Ingredient Content
Application
Mass Transfer, Separation
Advantage
Low Pressure Drop
Characteristic
High Mass Transfer Effect
Trait
Uniform Liquid Distribution
Structure Feature
Ring Form Filler
Usage
Chemical Engineering, Chemical Industry Product, S
Effect
Mass Transfer, Separation
Recommended Model
250ax 500bx 700cy
Structure Feature 1
Chemical Filter
Transport Package
Carton Box, Ton Bag, Steel Drum
Specification
customerized
Product Description
Product Description
Product Description
pall ring | Pall ring is a open-hole ring packing,which high and diameter is the same and with 5 ligules toward inside at every floor. Usually the open surface is 30% of the whole wall surface, this character helps the liguid & gas pass in packing tower pass freely from the windows of the rings.Metal Pall Ring, has features such as thin wall, heat resistant, high free volume, high capacity, low resistance, high separation efficiency and so on. | |
intalox saddle ring | The intalox saddle ring is processed by continuous extrusion process. Compared with the Raschig ring packing of the same material, it has the advantages of large flux, low pressure and high efficiency. Compared with Pall ring, it has the advantages of small resistance, large flux, high efficiency and good packing strength and rigidity. It is the most widely used bulk packing at present. The intalox saddle ring packed bed has a large void fraction, and most of the bed is arc-shaped liquid channel, which reduces the resistance of gas passing through the bed and the radial diffusion coefficient when the liquid flows downward | |
wire mesh corrugated pcking | MMCP (metal mesh corrugated packing) is a kind of packing is a new type of corrugated packing which has been successfully designed and developed in recent years according to the development of production. It is stamped with a metal sheet, stretched into a specific calendered mesh, and the surface is formed into a regular rhombic mesh. The geometric regular structure of the mesh corrugated packing is pressed into a corrugated sheet, and then assembled into a disc-shaped corrugated structured packing. | |
orifice corrugated packing | Corrugated Plate Packing is constructed of corrugated sheets of ceramic.The angle of inclination of the corrugations of adjacent sheets is reversed with respect to the vertical column axis, form mixing cells at every point where the corrugation intersect. Owing to ceramic surface has good hydrophilic, it can enlarge to gas-liquid contacting surface area. Meanwhile, ceramic surface's microporous structure also improve wettability.In addition, ceramic excellent corrosion resistance makes Ceramic Corrugated plate packing more suitable for sulfuric acid absorption, the nitrate concentration,gas purification and so on. Ceramic high thermal stability make its operating temperature exceeds 1000 ºC. | |
If you did not find the packing you want, please contact us any time. Detailed Photos
ApplicationApplications for tower packing include:
- aeration
- acid gas scrubbing
- catalytic gas scrubbing
- distillation
- precipitation
- particulate removal
- mist elimination
Tower packing is also used in water treatment, direct-contact hot water production, oxygenation, degasification, absorption, desorption, rectification, extraction, desalting, drying, mixing, fish farming, biological filtering, and the treatment of greenhouse gases.
Tower packing materials provide a high surface area with a low bulk density. A high surface area material is useful for coalescing steam and water in high humidity applications, while a low bulk density material allows a minimally-obstructed flow of the moisture-laden (and, possibly, particulate-laden) gas stream. As such, the hot exhaust gases and/or steam from a gas scrubber, incinerator, furnace, pollution control device, or similar equipment pass through a vertical column; the hot gases rise in the flue. Within the column, tower packing provides a surface for capturing moisture and/or particulates that then fall to a collection point at the bottom of the tower while the hot gases rise to an exit.
Product Parameters
pall ring
Size (inch /mm) | Bulk Density | Number | Surface Area | Free Volume | Dry packing factorm-1 |
(SS304 kg/m3) | (per m3) | (m2/m3) | (%) |
1/4" | 6*6*0.3 | 900 | 4000000 | 904 | 88.6 | 1307.4 |
3/8" | 10*10*0.3 | 480 | 768000 | 482 | 93.8 | 583.8 |
1/2" | 13*13*0.3 | 420 | 410000 | 415 | 94.8 | 489.2 |
5/8" | 16*16*0.3 | 348 | 201000 | 344 | 95.5 | 393.2 |
1" | 25*25*0.4 | 288 | 53500 | 212 | 96.2 | 229.8 |
1" | 25*25*0.5 | 367 | 53500 | 216 | 95 | 237.2 |
1" | 25*25*0.6 | 439 | 53500 | 219 | 94.2 | 244.1 |
1.5" | 38*38*0.4 | 193 | 15180 | 143 | 97.2 | 148.4 |
1.5" | 38*38*0.5 | 246 | 15180 | 145 | 96.7 | 151.7 |
1.5" | 38*38*0.6 | 328 | 15000 | 146 | 95.9 | 154.6 |
2" | 50*50*0.5 | 185 | 6500 | 106 | 97.5 | 128.5 |
2" | 50*50*0.7 | 315 | 6500 | 108 | 96.4 | 130.5 |
2" | 50*50*0.9 | 380 | 6500 | 132.5 | 95.4 | 134 |
3" | 76*76*0.8 | 265 | 1920 | 69 | 97.4 | 79.6 |
3.5" | 901*90*1.0 | 224 | 1220 | 61 | 97.1 | 66.2 |
intalox saddle ringSize (mm) | Bulk density (304,kg/m3) | Number (per m3) | Surface area (m2/m3) | Free volume (%) | Dry Packing Factor m-1 |
15mm | 16.5*10.6*0.25 | 223 | 324110 | 275 | 97.2 | 300.2 |
15mm | 16.5*10.6*0.3 | 263 | 324110 | 275 | 96.7 | 304.9 |
25mm | 25.9*12.6*0.25 | 163 | 127180 | 415 | 4.8 | 489.2 |
25mm | 25.9*12.6*0.3 | 192 | 127180 | 344 | 95.5 | 393.2 |
25mm | 25.9*12.6*0.4 | 266 | 127180 | 199 | 96.6 | 221.0 |
40mm | 35.4*18.8*0.25 | 124 | 51180 | 151 | 98.4 | 158.3 |
40mm | 35.4*18.8*0.3 | 146 | 51180 | 151 | 98.1 | 159.7 |
40mm | 35.4*18.8*0.4 | 203 | 51180 | 151 | 97.4 | 163.2 |
50mm | 48.5*28.6*0.3 | 95 | 15550 | 97 | 98.8 | 101.0 |
50mm | 48.5*28.6*0.4 | 132 | 15550 | 97 | 98.3 | 102.5 |
50mm | 48.5*28.6*0.5 | 169 | 15550 | 97 | 97.9 | 103.9 |
60mm | 67*37*0.4 | 113 | 9000 | 84 | 98.6 | 87.3 |
60mm | 67*37*0.5 | 145 | 9000 | 84 | 98.2 | 88.4 |
70mm | 76.5*42.5*0.4 | 83 | 4690 | 61 | 99.0 | 62.9 |
70mm | 76.5*42.5*0.4 | 106 | 4690 | 61 | 98.7 | 63.5 |
wire mesh corrugated pckingType | Specific area | Void | Theo.Plate | HETP | Max.F factor |
m2/m3 | % | Piece/m | mm | m/s.(kg/m3)0.5 |
250X/Y | 250 | 95 | 2.5-3 | 100 | 2.5-3.5 |
500X/Y | 500 | 90 | 4-5 | 200 | 2.0-2.4 |
700X/Y | 700 | 85 | 8-10 | 333-400 | 1.5-2.0 |
orifice corrugated packingModel | Surface area M2/M3 | Void fraction % | peak height mm | peak distance mm |
#100X,Y | 100 | 90 | 32 | 50 |
#125X,Y | 125 | 87 | 23 | 43 |
#250X,Y | 250 | 82 | 13 | 21 |
#350X,Y | 350 | 78 | 9 | 14.5 |
#450X,Y | 450 | 75 | 7.2 | 11.5 |
#550X,Y | 550 | 72 | 6.3 | 9.4 |
#700X,Y | 700 | 70 | 4.3 | 7.7 |
If you did not find the Product Parameter you want, please contact us any time. Company Profile
Suzhou Woju Environmental Protection Technology Co., Ltd. is located in Suzhou City, Jiangsu Province, is a profession al production and supply of metal regular packing - corrugated packing and mesh corrugated packing, gas and liquid filter, random packing - Pall ring and moment saddle ring, wire mesh defroster, hole plate defroster, baffle defroster and tower inner parts manufacturers.
Our company is a set of design, production, sales, installation as one of the factory company, the company from the beginning of the establishment in 2017, has been adhering to the "for customers to solve problems" spirit, sincere intersection with each customer, so that customers buy our products no longer have worries.
Our company has 80 employees, most of whom are experienced operation, maintenance and installation personnel, over the years with Tianjin University and other professional authorities to exchange cooperation to provide customers with the required tower body filtration engineering consulting and solutions. We can provide one-stop service for the design,production, transportation and installation of the whole interior of your tower.
Certifications
Welcome your inquiry and expect to provide satisfactory products and services for you.
Address:
Building 4, 1st Floor, Factory Building 1919 Fengyang Road, Weitang Town, Xiangcheng District, Suzhou City, Suzhou, Jiangsu, China
Business Type:
Manufacturer/Factory
Business Range:
Chemicals, Health & Medicine, Industrial Equipment & Components, Manufacturing & Processing Machinery, Metallurgy, Mineral & Energy
Management System Certification:
ISO 9001
Company Introduction:
Our company is located in Suzhou City, Jiangsu Province, with two factories, Hebei Wojun and Suzhou Wojun. Adhering to the original intention of always putting quality first, it has served more than 7000 customers in the chemical, pharmaceutical, petroleum, steel, environmental protection, and new energy industries worldwide.
Our company is specialized in designing, producing, selling, dismantling, and installing tower internal components such as regular packing, bulk packing, wire mesh defoamer, etc. We provide customers with a one-stop service. Our process technology relies on the technical design team of Tianjin University, and we have 50 regular packing production lines.
We have over 30 years of experience in tower internals design and production. We are delighted to have the opportunity to share our successful experience and provide VALOR solutions for the petrochemical industry.
We designs and manufactures complete tower and vessel sets for a very wide range of speciaity chemical processes, including solvents, plastlcs, pesticides, pharmaceuticals and fertilizers. We have provided VALOR solutions for multiple petrochemical companies both domestically and internationally.
We have a professional team and technology in mist elimination applications for liquid removal from vapor streams and liquid-liquid separation technologies within the refining industry. We specialize in providing internals for quick replacements during turnarounds or outages.