SS304 750mm Stainless Steel Knitted Wire Mesh Demister Pad

• Customization: Available
• Manufacturing Process: Mesh Knitting and Grids Welding
• Surface Treatment: Grids with Pickling Treatment
• Model NO.: ID750
• More Material Option: PP, PTFE, Monel, Ta2, Nickel, Co-Knit
• Wire Size: 0.12 - 0.3 mm
• Mesh Thickness: 50 - 300 mm
• Mesh Density: 80 - 432 Kg/M3
• Shape Option: Round, Rectangular, Donut, Other
• Incoterm: EXW, Fob, CNF, DDU, DDP, etc.
• More Port Option: Tianjin, Qingdao, Guangzhou, Yiwu, etc.
• Transport Package: Wooden Box
• Specification: ID600-ID16000
• Trademark: Wojun
• Origin: China
• HS Code: 842139
• Production Capacity: 5000 PCS / Year
• Package Size: 70.00cm * 70.00cm * 30.00cm
• Package Gross Weight: 60.000kg

Product Description

SS304 750mm Cellular Structure Stainless Steel Knitted Wire Mesh Demister Pad
The demister safely functions because the design adapts to changes in gas or fluid flow rate. Generally, the 100mm mesh pad is used, but the mesh pad of greater thickness is used where the flow rate changes extensively, offering increased production.
Though the demister is deemed the standard type because it is used in many fields, this model is strong and highly efficient. The demister is used in places where it is necessary to reduce accompanying airborne droplets to a minimum.

Demister pad vapor liquid separator Specifications

1. Material SS304

2. Shape & Size Φ750 mm

3. Mesh Thickness 100 mm

4. Demister Height 150 mm

5. Wire Diameter 0.28 mm

6. Mesh Density 176 kg/m3

7. Void Fraction 0.978

8. Specific Area 315 m2/m3

9. Grids Flat bar 25*3mm

Applications of demister pad

1. SS304 Water solutions, Nitric acid reduced crude petroleum fraction etc.

2. SS316L  Fatty acid reduced crude containing naphthenic acids and corrosive chemicals3.

3. Synthetic fiber For corrosive service at moderate temperature

4. PP(Polypropylene) For corrosive service at temperature up to 70ºC

5. PTFE For corrosive service at temperature of (-190ºC, 250ºC)

6. Monel Caustic soda, dilute acid

7. Nickel Caustic Soda, food products

8. Copper Freon, alcohol

9. Aluminium Nitric Acid

How do demister pad mist eliminators work?

When a vapor stream carrying entrained liquid droplets passes through the EIT Mesh but the inertia of the droplets causes them to contact the wire surfaces and be held there briefly. As more droplets collect, they grow in size, run off and fall free. Properly applied to specific process conditions, DEMISTER mist eliminators achieve 99.9% separation of liquid entrainment from any vapor stream, assuring pure product overhead. Pressure drop is usually less than 25.4 mm H2O (1" WC).

Mesh Density	Eq to: YORK	Description
80	931	For a given load of mist, the highest flow velocity is achieved of all styles. Ideal where it is required to minimize the pressure loss, possible clogging is concerned, the size of particle to be collected is relatively large, and/or a very high efficiency is not required.
144	431	Used for general purposes. An efficiency of 98 to 99% is achieved at a velocity of 1 to 5 m/sec.
192	421	Used where an especially high efficiency is required. While a pressure loss is slightly higher, it achieves an efficiency of 99 to 100% with particle sizes 3μ or more at a velocity of 1 to 6 m/sec., and is ideal where an efficiency of 90% or more is required at a velocity of 1 m/sec. or less.
216		Used for collecting fine particles of 1 to 3μ in size. Especially for a low-density mist of 1.0 g or less, it is used in a thickness of 200 to 300 mm.
432	333	Used for collecting fine particles. An efficiency higher than that of 216 can be achieved. The most remarkable characteristic is that it provides a high efficiency with a reduced thickness.